Mill,분말/초미립자분쇄기

FPS에서 생산하는 Mill은 Application에 따라 여라가지 종류가 있습니다
Spiral Jet Mill, Q-Mill, Mechanical Mill, Multimilling Flatform, R&D unit Mill, Pro Mill 등 사용 목적에 따라 다양한 제품을 공급하고 있습니다.
URS에 따라 Customized 하여 개발하며 Customer 요구사항에 맞춤 제품을 생산합니다.

 promill3
Pro Mill 8
The ProMill-8 jet mill is designed for production needs. The typical batch sizes is between 2kg and 1000kg. It’s available in two configurations, cosmetic/chemical and pharmaceutical, to better-fit different requirements.
At FPS R&D and test center it’s possible to perform technical trials with products on ProMills.
ProMill-8 unit is available in:
– ATEX configuration
– with PLC control system
– with interchangeable inserts
  (AISI316L, HC-22, PTFE, HDPE or ceramic)

 promill
 Pro Mill 12
promill1
Pro Mill 16
The ProMill-16 jet mill is designed for production needs. Typical batch sizes is between 20kg and 5000kg. It is available in two configurations, chemical and pharmaceutical, to better-fit different requirements.
At FPS R&D and test center it’s possible to perform technical trials with products on ProMills.
ProMill-16 unit is available in:
– ATEX configuration
– with PLC control system
– with interchangeable inserts
  (AISI316L, HC-22, PTFE, HDPE or ceramic)
– WIP /CIP
 qmill2_1 (1) qmill6_0
Q-Mill

QMills technology is an alternative to mechanical mills.
Interchangable with spiral jet mills, QMill series is designed to be a pharmaceutical alternative to pin mills and hammer mills.
PLUS
Fluid jet mill type
Larger inlet PSD
Outlet PSD to 20 μm
Micronization of plastic type materials
High throughput
Interchangeable with spiral jet mills

qmill8_small1

Q-Mill
 pin-mill (1)
Pin Mill

PinMill is designed to reduce agglomerates of pharmaceutical, chemical and food products down to fine size. The system includes hygienic design mill housing with interchangeable rotor and stator. The size reduction of the product is considered function of:
•  the product being processed, with its chemical and physical properties;
•  the rotating speed;
• the product feed rate into the milling chamber, that defines the quantity of product inside the milling chamber;
• the process temperature
• the adopted tool (pins, knives, hammers, blades).

pin-mill100

 

Pin Mill
 pilotmill4-1a
The PilotMill-2 jet mill is designed for product research and developments needs, where batches from 1g to 3kgare considered. In function of these process condition, the PilotMill-2 jet mill has been designed to assure higher micronized product yield. It is available in top discharge configuration with product recovery inside the filtering bag to further maximise product yield.
The PilotMill-2 jet mill may be easily integrated into glove box systems to allow the process of very high active or sterile products. It’s also available in ATEX configuration. Special configuration i.e. with PTFE or ceramic inserts/lining, in Hastelloy and others are available
 pilotmill3

 

Pilot Mill
 pilotmill-6
Pilot Mill
 pilotmill4 (1)
Pilot Mill
 pilotmill2
The multimilling station is the best choice for the execution of milling operations in research departments and pilot plants, with different technologies integrated on a single system.
The platform considers:
–          Spiral jet mill type PILOTMILL-4, PILOTMILL-5
–           Pin mill 100
–           Loop mill type QMILL-6
–           Conical mill
A minimum footprint is given for use in existing rooms.
The milling system can be operated in conjunction with a cryogenic exchanger which allows the reduction of process temperature down to -100°C.
Integration with isolator systems is possible for processing HPAPI.
multimillingstation-inisolator_0

 

Multi Milling Station on Isolator
multimilling

 

Spiral Jet Mill
 randdunit

 

R&D Unit

필요하신 사양이 있으시면 URS를 통해 정확한 모델 및 사양을 선택하실 수 있습니다.

감사합니다.

FPS社 회사 및 제품 소개서를 아래 첨부하였습니다, 참조하시기 바랍니다.

Clean Room Environment Solution